LIMITED EDITION • WEBSITE EXCLUSIVE

In ‘The Happiness Patrol’ the Doctor and Ace land on the planet Terra Alpha, where sadness is against the law. In an effort to enforce joy, Helen A’s Happiness Patrol paint the TARDIS pink. After the Doctor helps with the rebellion, normal emotions are restored and the TARDIS is painted blue again.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

This incredible sixth scale statue shows the Tenth Doctor as portrayed by David Tennant. He is dressed in the blue version of his suit, holding his sonic screwdriver and wearing his trench coat.

The statue is in scale with Eaglemoss's other mega statues, and is perfect to be displayed alongside the Fourth and the Fifteenth Doctors. It was sculpted digitally before being cast in a high quality resin and painted by hand.

The statue stands approximately 32 cm tall.

The original TARDIS prop was modified in “The War Games” and this version was used throughout the Third Doctor’s stories and for the Fourth Doctor's first two seasons. Various repairs were made during this time, most notably, it was given a fresh coat of paint. The original prop was eventually retired in 1976, meaning it had been in service for 13 years.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.9 cm tall.

This is a pre-order that is due to ship in September.

The Valeyard was a malevolent version of the Doctor who was pulled out of time. He claimed to be created from somewhere between the Doctor's Twelfth and Thirteenth regenerations. He led the prosecution of the Sixth Doctor in the Trial of a Time Lord, hoping to take the Doctor's remaining regenerations for himself. The figurine is 9.6 cm tall.

This figure of The Veil features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

Capturing The Veil all wrapped up with an absence face ready to inexorably hunts the good Doctor down.

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 113mm tall.

This stunning figure of one of the Thijarians features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

The figure depicts a Thijarian as they appeared in the 13th Doctor episode 'Demons of the Punjab'.

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 104mm tall.

This Time Lord Victorius Set #1 features the Dalek Drone & Emperor Dalek. The figures have been faithfully recreated as hand-painted polyresin figurines at 1:21 scale (approximately 9cms tall), complete with an in-depth companion magazine – highlighting the history, costumes, and stories behind these characters from the longest-running science fiction show on television! Presented in a themed box. Fully BBC licensed and approved merchandise.

The Tritovores were insect like humanoids with heads that would have looked at home on a giant fly. They appeared in the story 'Planet of the Dead', when they captured the Tenth Doctor and Christina de Souza, who they believed were responsible for crashing their spaceship. The figurine is 10 cm tall.

One of the last models Eaglemoss released was the light cycle from the classic 1982 movie 'Tron'. This is the blue version. The red, yellow and orange versions were also released in a limited edition. The film used groundbreaking effects techniques and the cycles themselves were designed by the legendary Syd Mead, who is famous for his work on 'Blade Runner' and 'Aliens'. The Eaglemoss model is 8.7 inches (22 cm) long.

EXCLUSIVE LIMITED EDITION Eaglemoss RED model of the light cycle from the 1982 movie Tron. The model is 8.7 inches (22 cm) long and is available here for the first time.

Visionary pioneer Gerry Anderson created a world full of captivating characters, spectacular vehicles and exciting stories that are beloved by generations of fans around the world. Now you can create your own miniature adventures with The Anderson Collection.

All your favorite heroes and villains brought to life in a cool retro style. Designed with collectors in mind, each figure sports 5 points of jointed articulation, authentic character likenesses and detailed costumes. Faithfully recreated in 3.75 inch (9.5 cm) scale and packaged in a nostalgic format featuring gorgeous artwork.

Collect all the figures from your favorite shows Thunderbirds, Stingray, Joe 90, Captain Scarlet, UFO, and Space: 1999.

Age restriction 14+

Collectors edition, fully articulated figure of the Twelfth Doctor. Featuring a fully realised likeness of Peter Capaldi, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

The U.S.S. Cerritos is a California-class starship that is tasked with making second contact, offering engineering support and making supply runs. It's the star of Star Trek: Lower Decks, and is where Mariner and Boimler served their time as ensigns.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a light-up replica of the Master Systems Display (MSD) on the U.S.S. Defiant. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

This is a preorder that will ship in the fall of 2025.

The U.S.S. Discovery is a Crossfield-class starship that was used as the testbed for the spore drive, and was active during the Klingon war.

This is the original version, which featured in the first two seasons of Star Trek: Discovery, before the ship was sent to the 32nd century.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

When the big screen version of Star Trek was rebooted in 2009, the creators redesigned the Enterprise to look sleeker and sexier than ever. As director JJ Abrams said, this was the "hotrod" version of the ship. This version also appeared in Star Trek: Into Darkness before it was modified for Star Trek Beyond.

This Enterprise was designed by Ryan Church, who is famous for his work on the Star Wars movies.

The model is part of Master Replicas new range of 4 to 5-inch long  die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a preorder that will be shipping in Q3 2025.

Special Shipping Rate. USA $8.99 (for up to three models). UK £3.99.

This version of the U.S.S. Enterprise made its debut at the end of Star Trek: Discovery's first season before going on to star in Star Trek: Strange New Worlds where it is commanded by Captain Pike.

The ship is a reimagining of Matt Jefferies' original design combined with elements of the motion picture version of the Enterprise and some subtle nods to the NX-01. It was designed by John Eaves, Scott Schneider and William Budge.

The model is part of Master Replicas new range of 4 to 5-inch long models, and is accompanied by a 48-page book, which slides into the base to make a display.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a preorder that will be shipping in Q3 2025.

Special Shipping Rate. USA $8.99 (for up to three models). UK £3.99.

This is a full-sized, polyresin replica (15 inches wide) of the dedication plaque for the original series Enterprise. It was on the bridge of the ship just to the right of the turbolift doors.

The plaque was carefully researched by Star Trek scenic artist Mike Okuda who supplied us with detailed drawings that we used to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time an officially licensed full-size version has ever been available.

You may be surprised to see that it identifies the Enterprise as a Starship-class ship. The term Constitution class was used by fans but only became canon in the first season of TNG when it appeared on a computer readout in "The Naked Now".

This is a preorder that will ship in October.