During the Seventh Doctor’s tenure, there were actually three different versions of the TARDIS, all of which were made of fibreglass. They were all cast from the same moulds, but there were differences to do with the frame around the sign at the top and the position of the lock and handles. These TARDIS props had doors on the front and the back. On one side, the door opened on the left; on the other side, it opened on the right.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

LIMITED EDITION • WEBSITE EXCLUSIVE

In ‘The Happiness Patrol’ the Doctor and Ace land on the planet Terra Alpha, where sadness is against the law. In an effort to enforce joy, Helen A’s Happiness Patrol paint the TARDIS pink. After the Doctor helps with the rebellion, normal emotions are restored and the TARDIS is painted blue again.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

The Sixth Doctor is depicted as he appeared in the episode “VENGEANCE ON VAROS”

As fiery as he was flamboyant, as theatrical as he was thrilling, and as abrasive as he was brave, this Doctor was as much a contrast as his coat of many colours!

Scale 1:21, approx 84mm tall.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

Facing old adversaries like the Daleks was always tough for the Doctor, but it wasn’t anything like as tough as meeting an old friend…

The Tenth Doctor is shown as he appeared in the episode “SCHOOL REUNION”

Scale 1:21, approx 84mm tall.

This incredible sixth scale statue shows the Tenth Doctor as portrayed by David Tennant. He is dressed in the blue version of his suit, holding his sonic screwdriver and wearing his trench coat.

The statue is in scale with Eaglemoss's other mega statues, and is perfect to be displayed alongside the Fourth and the Fifteenth Doctors. It was sculpted digitally before being cast in a high quality resin and painted by hand.

The statue stands approximately 32 cm tall.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

This figure captures the Third Doctor played by actor Jon Pertwee in the classic 1973 adventure "THE GREEN DEATH". The figurine wears his classic petrol blue and red velvet blazer and black trousers, frilly shirt and bow tie, and holds his all important sonic screwdriver.

Scale 1:21, approx 84mm tall.

The original TARDIS prop was modified in “The War Games” and this version was used throughout the Third Doctor’s stories and for the Fourth Doctor's first two seasons. Various repairs were made during this time, most notably, it was given a fresh coat of paint. The original prop was eventually retired in 1976, meaning it had been in service for 13 years.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.9 cm tall.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

This figure marks the start of an exciting new era with the regenerated Doctor sporting her high-waisted culottes, rainbow-striped dark blue tee shirt, and a long grey and blue coat.

The Twelfth Doctor is shown as she appeared in the episode “THE WOMAN WHO FELL TO EARTH"

Scale 1:21, approx 84mm tall

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

This stunning figure of the 12th Doctor Peter Capaldi features incredible detail and is part of a collectable limited edition series of fine quality figurines.

highly detailed metallic resin figurine has been crafted and painted by hand, and shows the Twelfth Doctor from the episode 'Flatline' as he steps out of his TARDIS in his dark blue Crombie suit with red check lining and Paul Smith trousers, brogues and he wears a signet ring on his ring finger.

The Twelfth Doctor is shown as he appeared in the episode “FLATLINE”

Scale 1:21, approx 84mm tall.

The Valeyard was a malevolent version of the Doctor who was pulled out of time. He claimed to be created from somewhere between the Doctor's Twelfth and Thirteenth regenerations. He led the prosecution of the Sixth Doctor in the Trial of a Time Lord, hoping to take the Doctor's remaining regenerations for himself. The figurine is 9.6 cm tall.

This figure of The Veil features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

Capturing The Veil all wrapped up with an absence face ready to inexorably hunts the good Doctor down.

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 113mm tall.

The Vigil appeared in the Eleventh Doctor story 'The Rings of Akhaten', when the Doctor takes Clara on her first trip to an alien world. The Vigil are servants of 'the old God' and are responsible for feeding the Queen of Years to it. The figurine is 9.8 cm tall including the base.

This figure of the War Doctor played by John Hurt depicting 'the one who broke the promise' as he is seen in the 2013 Eleventh Doctor tale 'The Day of the Doctor' and features incredible detail and part of a collectible series of fine quality figurines. Fully BBC licensed and approved merchandise. Scale 1:21, approx 92mm tall.

This stunning figure of one of the Thijarians features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

The figure depicts a Thijarian as they appeared in the 13th Doctor episode 'Demons of the Punjab'.

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 104mm tall.

One of the last models Eaglemoss released was the light cycle from the classic 1982 movie 'Tron'. This is the blue version. The red, yellow and orange versions were also released in a limited edition. The film used groundbreaking effects techniques and the cycles themselves were designed by the legendary Syd Mead, who is famous for his work on 'Blade Runner' and 'Aliens'. The Eaglemoss model is 8.7 inches (22 cm) long.

EXCLUSIVE LIMITED EDITION Eaglemoss RED model of the light cycle from the 1982 movie Tron. The model is 8.7 inches (22 cm) long and is available here for the first time.

Visionary pioneer Gerry Anderson created a world full of captivating characters, spectacular vehicles and exciting stories that are beloved by generations of fans around the world. Now you can create your own miniature adventures with The Anderson Collection.

All your favorite heroes and villains brought to life in a cool retro style. Designed with collectors in mind, each figure sports 5 points of jointed articulation, authentic character likenesses and detailed costumes. Faithfully recreated in 3.75 inch (9.5 cm) scale and packaged in a nostalgic format featuring gorgeous artwork.

Collect all the figures from your favorite shows Thunderbirds, Stingray, Joe 90, Captain Scarlet, UFO, and Space: 1999.

Age restriction 14+

Collectors edition, fully articulated figure of the Twelfth Doctor. Featuring a fully realised likeness of Peter Capaldi, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

"OUR BIGGEST LIGHT-UP PANEL YET 80 × 45 cm of screen-accurate starship, backlit at the touch of a button. This is a light-up replica of the Master Systems Display for the U.S.S. Cerritos, the California-class starship at the heart of Star Trek: Lower Decks — using the artwork created for the show by legendary Star Trek scenic artist Mike Okuda. Switched off, it’s a striking piece of Star Trek art. Switched on, it glows to life just like the displays on screen. Why you’ll love it • Our biggest panel yet — a commanding 80 × 45 cm (31.5"" × 17.7"") statement piece for any wall. The U.S.S. Cerrritos MSD is the same width as the other MSDs in the collection and is designed to be displayed alongside them. • Backlit film technology — press the button and the ship’s systems glow to life, using the same technology as Star Trek: The Next Generation. • Incredible artwork — spectacular switched on, and a striking piece of art when switched off, with high-resolution detailed artwork you can study in depth. • Densely labelled, screen-used artwork — created by Mike Okuda for the TV show. The MSD shows detailed ship schematics showing the ship from starboard, above, front and back with the key systems called out: warp core, impulse reactors, shuttlebay, phaser arrays and navigational deflector. • Easter Eggs – the MSD is packed with detail including the location of Cetacean Ops and the highly-classified Rubber Ducky room. • Collector-grade and officially licensed — built to the exacting Master Replicas standard as an official Star Trek: Lower Decks collectible. • Plug in and go — ready to hang on a wall or stand on a shelf. Specifications • Dimensions: 31.5"" × 17.7"" (80 × 45 cm) • Illumination: backlit film, one-button on / off • In the box: USB-C cable included (mains USB plug not included) • Mounting: wall-mountable or freestanding • Licence: officially licensed Star Trek: Lower Decks collectible by Master Replicas

This is a light-up replica of the Master Systems Display (MSD) on the U.S.S. Defiant. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.