The Koto was an MCRN patrol destroyer that was illegally sold to Marco Inaros and became part of the Free Navy. It was one of several ships that attacked the Rocinante in the episode 'Hard Vacuum', when it was disabled by an attack from Drummer's ship.

The Koto was designed by Ryan Dening, who also designed many ships for Star Trek.

It was produced but never sold by Eaglemoss and we have acquired all the stock. Length approximately 9 inches (22 cm).

The Tachi was the original name and paint scheme for the Rocinante when it was an MCRN ship. It appeared in the first season of The Expanse before Holden and his crew repainted and renamed it.

The model is 10 inches (25 cm) long.

This is a limited edition of 500 pieces that is exclusively available to club members.

Shipping From: February 2025

This incredible sixth scale statue shows the Fifteenth Doctor as he made his full debut in "The Church on Ruby Road". This Doctor has an irrepressible passion for life, and takes great pleasure in the way he dresses.

The statue is in scale with Eaglemoss's mega statues, and is perfect to be displayed alongside the other Doctors including the Fourth and the Tenth. It was sculpted digitally before being cast in a high quality resin and painted by hand.

The statue stands 12.5 inches (32 cm) tall including the base.

This figurine shows the Fourth Doctor as he appeared in his final story 'Pyramids of Mars' It is just over 10 cm tall.

This figurine captures Tom Baker's Fourth Doctor, clad in the ceremonial Gallifreyan robes he donned in 'The Deadly Assassin'. The story saw the Fourth Doctor pitted against the Master who returned after three years in a new, decrepit wraith-like form played by Peter Pratt! The President of Gallifrey is resigning, and ready to name his successor but the Doctor is an unwanted guest at the ceremony. Scale 1:21, approx 110mm tall.

The Autons are a form of living plastic that is animated by the Nestene Consciousness. They made their debut in 'Spearhead from Space', the story that introduced the Third Doctor. As part of their plan, they created humanlike bodies that had guns concealed in their hands. This figurine shows an Auton worker, who were effectively warriors and only had crude features. The figurine is 10 cm tall.

Collectors edition, fully articulated figure of The Master. Featuring a fully realised likeness of Roger Delgado, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

This figure captures the likeness of the character as seen in the 2020 Thirteenth Doctor Adventure 'The Timeless Children'.

Fully BBC licensed and approved merchandise.

Scale 1:21, approximately 93mm tall.

.

At the end of the Time War, the Master used a chameleon arch to turn himself into the human Professor Yana. He then hid himself as the end of the Time. Yana was a kind man who only realised his true identity when he met the Doctor. Once he regenerated, the Master was as murderous as ever. The figurine, which is one of Eaglemoss's very best, is 9.6 cm tall.

To celebrate the 25th anniversary of The Matrix, Master Replicas are releasing an incredibly detailed die-cast model of Morpheus's ship The Nebuchadnezzar.

When The Matrix was released in 1999, the Wachowskis changed cinema forever. Sci-fi had never been cooler. The original movie played with huge ideas as Morpheus and his allies freed Neo from his mundane reality and introduced him to the truth: a world where the machines have subjugated humanity.

The Nebuchadnezzar, which was designed by concept artist Tani Kunitake, was at the heart of the story. The Neb was a rusting hovercraft that used EM pulses to protect itself from the machines, as Morpheus and his crew managed to stay one step ahead of the robotic Sentinels.

This impressive die-cast model has been digitally sculpted before being cast in zinc alloy and ABS, and painted by hand. It has been officially licensed by Warner Bros. and is a true collectors item.

The ship measures 11.8 inches (30 cm) long.

When Doctor Who returned in 2005, the team built an entirely new TARDIS. This version was bigger than any of its predecessors and, in fact, bigger than an original London police box. The production team actually made four different versions of the prop but there were no significant differences between them.

The model is 1:21 scale to match the Eaglemoss figurines and stands 14.3 cm tall.

This is a pre-order that is due to ship in September.

The Sphere, or Cruiser, was the Kaylon's main attack ship. Each Cruiser was equipped with one Interceptor, which served as an auxiliary craft. All spheres were equipped with highly advanced technology, a single central cannon with impressive firepower and a hull that resisted target-locking.

Cruisers are capable of sustained quantum travel at 35 lightyears per hour.

The model is just under 7 inches (17.5 cm) across.

RARE SITE EXCLUSIVE The Kaylon Interceptor from The Orville is the smaller ship with a 'tail' that was carried inside the Kaylon sphere.

The model is just under 7 inches (17.5 cm) long. 

The Union Fighter PT-197, better known as the Pterodon, is a super-sleek one-man fighter, which made its debut at the beginning of the third season of The Orville. It was part of a new fleet of fighters that was introduced in the aftermath of the Kaylon War. It is incredibly maneuverable and, as Gordon will tell you, a hell of a lot of fun to fly.

The model, which measures just under 9 inches (22 cm)nose to tail, is made of die-cast and is based on the original CG model that was created for the show. It has never been available before.

Shipping From December 2024

The XL USS Orville from Seth McFarlane's sci-fi series.

Eaglemoss only released a limited number of ships from the series, and this is the XL version of the hero ship.

The model is approximately 10.25 inches (26 cm) long.

Destroyers were a pivotal part of the Krill military. A destroyer engaged enemy ships in direct combat, and its bombing capabilities made the ship the ideal choice to attack colony planets from space.

Yet destroyers were more than simple attack ships: the Krill designed them to host entire families, providing living arrangements, religious sanctuaries, and classrooms for children.

The model is approximately 8.66 inches (22 cm) long.

In moments of stress or contemplation, Captain Picard asked the replicator to produce a hot cup of Earl Grey tea. The replicator, knowing exactly what he wanted, produced the tea in an elegant glass cup.

The Star Trek: The Next Generation art department wanted the cup to look both futuristic and timeless. It had to be at home in the 24th century, but it also had to be instantly recognizable. Rather than creating their own tea cup from scratch, they looked for the best examples of modern, twentieth century design.

They settled on a glass tea cup made by European homewares company, Bodum.

The instantly recognizable BISTRO cup became so closely associated with Star Trek, that fans informally refer to it as “The Picard Cup”. It went on to appear in Star Trek: Voyager: Star Trek: Picard.

The original version of the TARDIS was modified at the end of the show’s third season. The design of the roof was altered so that it was flatter, and new doors were made with a new lock. This version first appeared in “The War Machines” and was used throughout the Second Doctor’s tenure. It was given a refit before “The War Games”.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

During the Seventh Doctor’s tenure, there were actually three different versions of the TARDIS, all of which were made of fibreglass. They were all cast from the same moulds, but there were differences to do with the frame around the sign at the top and the position of the lock and handles. These TARDIS props had doors on the front and the back. On one side, the door opened on the left; on the other side, it opened on the right.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.