Step on board Captain Kirk's Enterprise with this beautifully detailed toy phaser with authentic lights and sound. This classic toy was originally issued by Diamond Select and was widely praised for its accuracy and functionality. Master Replicas are reissuing it with updated sound effects, which like the ones on the original, were used on the original episodes.

The Type-2 phaser was the pistol version of this classic weapon. The smaller Type-1 phaser slots on to the top and contains the power settings. Turning the dial on the toy version changes the sound effects from low intensity stun or heat to the rarely seen (or heard) overload. The trigger activates the light on the front.

The phaser is full-scale and was carefully modelled on the original prop, making it ideal for cosplay. It takes three LR44 batteries that are fitted to the Type-1 phaser. The batteries are not included.

This is a pre-order that will ship in the second half of 2026

Get ready to join an Enterprise landing party with this detailed toy tricorder from the original Star Trek series with authentic lights and sound. The tricorder is based on careful study of the original prop. It is full size and measures 7.25” (19 cm) tall by 4.75” (12 cm) across.

The head flips up to reveal an illuminated display and three buttons each of which activates different sound effects, including the original scanning and calculating effects, and eight different pieces of dialogue taken directly from the original episodes.

Open the top flap to reveal the recording discs and the moire pattern, which moves when you press the center button. The lower compartment contains more moulded recording discs and a separate handheld scanner, which pulses with different coloured lights when it is activated.

The tricorder takes three AAA batteries; the hand-held scanner takes two LR44 batteries, which are not included.

In moments of stress or contemplation, Captain Picard asked the replicator to produce a hot cup of Earl Grey tea. The replicator, knowing exactly what he wanted, produced the tea in an elegant glass cup.

The Star Trek: The Next Generation art department wanted the cup to look both futuristic and timeless. It had to be at home in the 24th century, but it also had to be instantly recognizable. Rather than creating their own tea cup from scratch, they looked for the best examples of modern, twentieth century design.

They settled on a glass tea cup made by European homewares company, Bodum.

The instantly recognizable BISTRO cup became so closely associated with Star Trek, that fans informally refer to it as “The Picard Cup”. It went on to appear in Star Trek: Voyager: Star Trek: Picard.

Join an Enterprise landing party with this exceptional toy communicator with authentic lights and sound. This classic toy was originally designed by Diamond Select and was widely praised for its accuracy and functionality. Master Replicas are reissuing it with new sound effects, taken directly from the original Star Trek episodes.

The Star Trek communicator is a classic piece of design that inspired today's mobile phones. It was capable of sending signals across vast distances and was used to establish a transporter lock. This version was used by Captain Kirk and his crew during their first five-year mission.

The toy communicator is full-scale and was carefully modelled on the original prop, making it ideal for cosplay. It is activated by flipping it open. It has nine different sound clips taken from the original Star Trek, a moving moire pattern and working lights. It takes four AAA batteries (batteries not included).

This is a pre-order that will ship in the second half of 2026

Turn your desk into the bridge of a starship with this extra large desk mat, that's designed to sit under your keyboard and mouse. The mat uses artwork created for Data's Ops station on the U.S.S. Enterprise NCC-1701-D and it's hard to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

Discover the inside story of the rebirth of one of Star Trek’s most beloved sets: the bridge of the U.S.S. Enterprise NCC-1701-D, which made an emotional return in Star Trek: Picard. Art director Liz Kloczkowski was tasked with bringing this iconic set back to life. Now she has written the ultimate insider account, revealing how the art department unearthed every piece of information they could find and, working with an army of skilled crafts people and Star Trek legends, they rebuilt the bridge in immaculate detail. This is an incredibly thorough and detailed account, packed with hundreds of rare photographs, plus original concept art and blueprints. A fascinating look at a unique episode of Star Trek history! Forewords by showrunner Terry Matalas and production designer Dave Blass Afterword by TNG´s original production designer Herman Zimmerman.

The U.S.S. Cerritos is a California-class starship that is tasked with making second contact, offering engineering support and making supply runs. It's the star of Star Trek: Lower Decks, and is where Mariner and Boimler served their time as ensigns.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

Turn your desk into the bridge of a starship with this extra large desk mat, designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard, and it's almost impossible to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 11.5". It has a rubber surface with stitched edges and a non-slip back.

Challenge your friends to a race through seven years of Star Trek: The Next Generation with this brand new board game. Players draw cards that send them on missions from famous episodes of TNG. Then race around the board trying to complete them first. Along the way you'll face hazards from an intron virus that de-evolves the crew, to a visit from Q.

The game is designed for up to eight players but only the best Starfleet officer will win!

The U.S.S. Voyager NCC-74656-J was a 32nd-century descendant of Captain Janeway's famous ship. It followed a similar design, but had detached hulls and warp nacelles and used programmable matter. It also acted as the tested for the Pathway drive, which worked without dilithium.

The ship was designed by Ryan Dening. The producers wanted it to be a tribute to Janeway's ship and to show the links between different eras of Star Trek.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which features a brand-new, in-depth interview with ,em>Discovery showrunner Michelle Paradise.

Turn your desk into the bridge of a Constitution-class starship with this extra large desk mat, which is designed to sit under your keyboard and mouse. The artwork is taken directly from displays on the bridge of Captain Kirk's Enterprise as seen in the original series.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

This version of the U.S.S. Enterprise made its debut at the end of Star Trek: Discovery's first season before going on to star in Star Trek: Strange New Worlds where it is commanded by Captain Pike.

The ship is a reimagining of Matt Jefferies' original design combined with elements of the motion picture version of the Enterprise and some subtle nods to the NX-01. It was designed by John Eaves, Scott Schneider and William Budge.

The model is part of Master Replicas new range of 4 to 5-inch long models, and is accompanied by a 48-page book, which slides into the base to make a display.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

LIMITED EDITION • ONLY 500 PIECES The U.S.S. Rubidoux was a California-class starship that was commanded by Captain Dayton. In 2380 it encountered an entity that fed on its power systems until it had absorbed the entire ship. Dayton and her crew were rescued by a team from the U.S.S. Cerritos, who beamed them away before the entity merged with the Rubidoux. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book. It is one of several limited-edition California-class ships that Master Replicas are producing. Its red markings show that it belongs to the command division. All the California-class variants come with an in-depth book that includes a profile of the U.S.S. Cerritos, with annotated plan views and information about the creation of Star Trek: Lower Decks, based on an exclusive interview with the show’s creator Mike McMahan. The Rubidoux is being produced in a limited edition of 500 pieces. This is a preorder that will ship in July 2026.

The D7 battle cruiser is one of the most important ships in the Klingon fleet. This is the original version of the class, which was commissioned by High Chancellor L'Rell to unite the Klingon Houses.

The ship was designed by Ryan Dening, who was careful to pay tribute to Matt Jefferies' original and the redesigned version that was made for Star Trek: The Motion Picture. Dening's version has appeared on both Star Trek: Discovery and Star Trek: Strange New Worlds.

The model is part of Master Replicas new range of 4 to 5-inch long, die-cast models, and is accompanied by a 48-page book, that features in-depth articles based on new interviews with writers Bryan Fuller and Kirsten Beyer, and original production artwork.

In the original series the crew regularly drank coffee from grey cups. In one of the most famous incidents, Kirk discovers that tribbles have got into his dinner, eaten his chicken sandwich and drunk his coffee.

The cups were originally made of styrofoam, whereas ours are made of earthenware. We've also added a detail that you might have missed. When the cups first appeared in 'Where No Man Has Gone Before', they featured an Enterprise logo with a wreath, but it never appeared on them again. With a little help, we sourced that logo from Gene Roddenberry's files at UCLA and have included it on our cup. The tribble is removable, so your coffee should be safe.

This is a light-up replica of the Master Systems Display (MSD) on the Sovereign-class U.S.S. Enterprise NCC-1701-E. . The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

This is a light-up replica of the Master Systems Display from the bridge of the U.S.S. Voyager. It features the same graphic that was used on the TV series, which was created by Mike Okuda’s scenic art department. It shows all the ship’s key systems including the shuttlebay, warp cores, turbolift network, and main deflector. The panels are designed to be hung on a wall or displayed on a shelf. They are powered by a USB C cable and light up at the press of a button just like the displays on a starship. They work in a very similar way to the real displays used on the show with backlit film. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light up panel measures an impressive 31.5” (60 cm) across and is 10.25” (26 cm) high. This is a preorder that will ship in Summer 2026.

This is a full-sized, polyresin replica of the dedication plaque for the U.S.S. Enterprise NCC-1701-A. It was the first time a dedication plaque had said that the Enterprise was a Constitution-class ship.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque.

The plaque confirms that the Enterprise was was launched from Earth's San Francisco Fleet Yards.

The U.S.S. Discovery is a Crossfield-class starship that was used as the testbed for the spore drive, and was active during the Klingon war.

This is the original version, which featured in the first two seasons of Star Trek: Discovery, before the ship was sent to the 32nd century.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Voyager. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop in 1994. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that Voyager was an Intrepid-class starship that was launched from Earth Station McKinley on Stardate 48038.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Voyager.