In moments of stress or contemplation, Captain Picard asked the replicator to produce a hot cup of Earl Grey tea. The replicator, knowing exactly what he wanted, produced the tea in an elegant glass cup.

The Star Trek: The Next Generation art department wanted the cup to look both futuristic and timeless. It had to be at home in the 24th century, but it also had to be instantly recognizable. Rather than creating their own tea cup from scratch, they looked for the best examples of modern, twentieth century design.

They settled on a glass tea cup made by European homewares company, Bodum.

The instantly recognizable BISTRO cup became so closely associated with Star Trek, that fans informally refer to it as “The Picard Cup”. It went on to appear in Star Trek: Voyager: Star Trek: Picard.

Turn your desk into the bridge of a starship with this extra large desk mat, that's designed to sit under your keyboard and mouse. The mat uses artwork created for Data's Ops station on the U.S.S. Enterprise NCC-1701-D and it's hard to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

One of the most iconic designs in the history of Stargate. The Goa'uld used Ha'tak motherships to impose their will on the Galaxy.

These vast ships resembled giant, spaceborne pyramids and were equipped with fearsome firepower. After the fall of the Goa'uld they were operated by the Free Jaffa.

This is one of a limited number of Stargate models produced by Eaglemoss.

The model is 8 inches (20 cm) wide.

This model, from Battlestar Galactica: Blood & Chrome shows the Galactica in its prime during the First Cylon War, when it had more gun turrets and heavier armor plating.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

The F-302 fighter interceptor was Earth's first fighter designed to operate in space. It was developed using alien technology that was acquired through the use of the stargates, and was armed with railguns and guided missiles. It had a hyperdrive and could make interstellar journeys.

Length: 4 inches (10 cm); Width: 8 inches (20 cm)

Bilskirnir is Thor’s ship, which made its debut in the Stargate SG-1 season 2 episode ‘Thor’s Chariot’, when it saved SG-1 from the Goa’uld. Bilskirnir was an incredibly powerful Asgard mothership with advanced transporter systems, engines that could cover intergalactic distances in hours, and an ion gun that could obliterate a Goa’uld Hat’tak ship.

In Norse mythology 'Bilskirnir' refers to Thor’s hall, where he lived with his wife Sif and their children.

The Master Replicas die-cast model is 15cm long and is based on the original VFX model, which was supplied to us by the production team.

The Puddle Jumpers were Ancient ships that were used to fly through the Stargates to different locations in the Pegasus Galaxy. The Master Replicas model is based on the original VFX files that were used on Stargate Atlantis.

The model itself is just under 6 inches (15 cm) long.

This is a replica of the Pegasus gate from Stargate Atlantis. It was discovered in the city of Atlantis after Daniel Jackson realised that, if they had enough power, the stargates could be used to travel between galaxies.

The Atlantis Gate was an upgrade on the SG-1 version. On the show its glyphs appeared digitally, as the crew dialed into a new location. The gate had been left unused for thousands of years after the Ancients fled to the Milky Way after losing their battle with the Wraith, but was revived by the Pegasus team.

The replica gate is made of polystone and comes with a separate display base that carries the Stargate Atlantis logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM.

The model measures 9.25 inches (23.5 cm) across.

Shipping From: January 2025

Since the first season of The Expanse the Rocinante has been at the heart of the action. It is an MCRN Corvette that was carried aboard the Martian navy flagship, the MCRN Donnager. After Holden and his crew took control they renamed it the Rocinante and it became their home.

In the real world the Roci was designed by Ryan Dening, who also worked on Star Trek.

This is the smaller of the two Eaglemoss versions, and it is 8.5" and (21.5 cm) long..

This is a full-sized, polyresin replica of the dedication plaque for the U.S.S. Enterprise NCC-1701-A. It was the first time a dedication plaque had said that the Enterprise was a Constitution-class ship.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque.

The plaque confirms that the Enterprise was was launched from Earth's San Francisco Fleet Yards.

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

In the original series the crew regularly drank coffee from grey cups. In one of the most famous incidents, Kirk discovers that tribbles have got into his dinner, eaten his chicken sandwich and drunk his coffee.

The cups were originally made of styrofoam, whereas ours are made of earthenware. We've also added a detail that you might have missed. When the cups first appeared in 'Where No Man Has Gone Before', they featured an Enterprise logo with a wreath, but it never appeared on them again. With a little help, we sourced that logo from Gene Roddenberry's files at UCLA and have included it on our cup. The tribble is removable, so your coffee should be safe.

Turn your desk into the bridge of a starship with this extra large desk mat, designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard, and it's almost impossible to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 11.5". It has a rubber surface with stitched edges and a non-slip back.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

Turn your desk into the bridge of a Constitution-class starship with this extra large desk mat, which is designed to sit under your keyboard and mouse. The artwork is taken directly from displays on the bridge of Captain Kirk's Enterprise as seen in the original series.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Voyager. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop in 1994. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that Voyager was an Intrepid-class starship that was launched from Earth Station McKinley on Stardate 48038.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Voyager.

To celebrate the 25th anniversary of The Matrix, Master Replicas are releasing an incredibly detailed die-cast model of Morpheus's ship The Nebuchadnezzar.

When The Matrix was released in 1999, the Wachowskis changed cinema forever. Sci-fi had never been cooler. The original movie played with huge ideas as Morpheus and his allies freed Neo from his mundane reality and introduced him to the truth: a world where the machines have subjugated humanity.

The Nebuchadnezzar, which was designed by concept artist Tani Kunitake, was at the heart of the story. The Neb was a rusting hovercraft that used EM pulses to protect itself from the machines, as Morpheus and his crew managed to stay one step ahead of the robotic Sentinels.

This impressive die-cast model has been digitally sculpted before being cast in zinc alloy and ABS, and painted by hand. It has been officially licensed by Warner Bros. and is a true collectors item.

The ship measures 11.8 inches (30 cm) long.

In the 2004 reimagined Battlestar Galactica, the fleet was regularly menaced by Cylon Raiders, which mounted strafing attacks on the human ships. The Cylon ships had a low level of sentience, which the show's creator Ron D. Moore likened to that of a horse.

The menacing design was created by concept artist Eric Chu, who gave it echoes of the design for the Cylon Centurion.

The Eaglemoss model is 10.6 inches (27 cm) long.

This version of the Viper appeared in the TV movie Blood & Chrome, which showed us a pivotal battle in the First Cylon war. The design is close to the version that artist Ralph McQuarrie designed for the original 1978 series, but was made more muscular and upgraded for modern audiences.

The Eaglemoss model is just under 10.5 inches (26.5 cm) long.