This is a full-scale polyresin replica of the dedication plaque from the bridge of the U.S.S. Enterprise NCC-1701-D. This is the version that featured in Seasons 5 through 7 of Star Trek: The Next Generation.  The plaque was designed by Scenic Art Supervisor Mike Okuda, who gave us the files he originally supplied to Jeff Clare in the Paramount sign shop. We used them to create this version, which is designed to be hung on a wall. At 11.5” x 9” (29 cm by 22.7 cm) this plaque is smaller than the plaques that were designed for Star Trek: Deep Space Nine and Star Trek: Voyager. The plaque comes without the wooden frame that featured on the bridge.  The plaque details the date the ship was launched, where it was constructed, and its motto. As an in-joke it features the names of several members of the production team, who are listed as members of the Starfleet team that built the ship.

**Previously Sold Out Due To High Demand - Now Shipping**

When Battlestar Galactica returned in 2004, it was with a redesigned ship that cleverly echoed the original. Seen from the side, Eric Chu's design looks radically different but when you spin it around, you see the familiar shapes of the classic version.

In the series, the Galactica is a relic of an earlier age, but its primitive technology allowed it to survive the Cylon attack to become humanity's flagship. The model measures just over 10.5 inches (27 cm) long.

Due to Ship March 2026

HOT DOG VARIANT LIMITED TO 750

The modern Viper is a careful update of Ralph McQuarrie's original design that was created for the 2004 reimagining of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans.

The Eaglemoss model bears the call sign "HOT DOG" for pilot Lt. Brendan Constanza, and is 10.6 inches (27 cm) long.

The Silurians ruled Earth millions of years before humans evolved, but environmental changes forced them to put themselves into hibernation. This version of the Silurians is from the Fifth Doctor story 'Warriors of the Deep' when they teamed up with their cousins the Sea Devils to attack Sea Base Four as the beginning of a plot to reclaim control of the Earth. The figurine is approximately 11 cm tall.

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

The monks appeared in a three-part Twelfth Doctor story starting with 'Extremis.' They created a virtual reality simulation to plan an invasion of Earth. They then conquered the planet for real, but only after requesting humanity's permission. They were shapeshifters, and chose a form that looked like a human corpse. The figurine is 10 cm tall.

The Autons are a form of living plastic that is animated by the Nestene Consciousness. They made their debut in 'Spearhead from Space', the story that introduced the Third Doctor. As part of their plan, they created humanlike bodies that had guns concealed in their hands. This figurine shows an Auton worker, who were effectively warriors and only had crude features. The figurine is 10 cm tall.

The Loki was a heavy cruiser that saw service in the First Cylon War. It was designed to carry supplies to combat vessels, but was heavily armed itself with 35 guns. The Loki was created for Battlestar Galactica: Blood & Chrome where it was part of the ghost fleet that was hidden from the Cylons.

The Eaglemoss model is approximately 10.5 inches (27 cm) in length.

Keep your friends close and your enemies closer with this incredible Doctor Who Evolution Set One: The Tenth Planet - Invasion of the Cybermen Box Set #3 from Eaglemoss. All stand at approximately 10 cm, have been cast in specially formulated metallic resin and hand painted. Fully BBC licensed and approved merchandise. Supplied in a themed presentation box.

The Vigil appeared in the Eleventh Doctor story 'The Rings of Akhaten', when the Doctor takes Clara on her first trip to an alien world. The Vigil are servants of 'the old God' and are responsible for feeding the Queen of Years to it. The figurine is 9.8 cm tall including the base.

The Carrionites appeared to be witches who appeared in the Tenth Doctor story 'The Shakespeare Code'. In reality they were aliens who had adopted human form. They had a technology that used words to produce enormous power.

The figure is 9.4 cm tall.

This version of the TARDIS was introduced in the 1976 story ‘The Masque of Mandragora’ at the beginning of the fourteenth season. By that point the original TARDIS prop was too battered to survive.

The new TARDIS was designed by Barry Newberry and was wider than its predecessor with a flatter roof. The text on the door panel was white on blue. There were some occasional changes to the lamp but this version remained in use for four years until the story ‘Horns of the Nimon’.

Our model was built by Gavin Rymill. It is 1:21 scale (to go with The Doctor Who Figurine Collection) and stands 132 mm tall to the top of the lamp.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

This figure captures the likeness of the character as seen in the 2020 Thirteenth Doctor Adventure 'The Timeless Children'.

Fully BBC licensed and approved merchandise.

Scale 1:21, approximately 93mm tall.

.

The Chameleons suffered a catastrophe on their home planet that left them without faces or identities. Arrogantly declaring themselves the most intelligent beings in the galaxy, they set about abducting and replacing humans‚at least, until the Second Doctor got involved.

The figurine is approximately 9.7 cm tall. .

This fantastic figure of the Borad is part of a collectable limited edition series of fine quality figurines. This figure captures Boran as he appeared in 'Timelash' the classic Sixth Doctor story.

The figurine is approximately 7.8 cm tall.

Aggedor features in two classic Third Doctor stories: 'The Curse of Peladon' and 'The Monster of Peladon'. For many years, the Peladonians believed Aggedor was a myth. Their legends said that the creature would bring terror, darkness and death when it returns.  The Doctor and Jo discover that the Aggedor were very real and that at least one has survived. That Aggedor is being manipulated in an attempt to disrupt a galactic alliance but the Doctor soon befriends it.

This figure was one of Eaglemoss's oversized specials and is approximately 13 cm tall.

The Melkur was said to be a source of great evil, kept sealed in a sacred grove. In truth, it was a camouflaged form for the Master TARDIS, which he used to ensnare and manipulate the heir to the Keeper of Traken and through her, the entire planet! Withered and dying, crippled by his lack of regenerations, the Master hoped to use the powers of the Keeper of Traken to grant himself a new life. His desperate search for immortality came to a climax at the end of this story when he claimed the body of Tremas played by the iconic Anthony Ainley.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

The Melkur is shown as it appears in the 1981 Fourth Doctor classic adventure 'The Keeper of the Traken'.

Fully BBC licensed and approved merchandise.

Approx 142mm tall.

This stunning figure of Dalek Sec features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

This figure captures Dalek as they appear in he Tenth Doctor episode 'The Daleks Take Manhattan'. The half human-Dalek hybrid was a failed Dalek experiment in revitalising their race. Brought to eerie life by expert modellers, cast in metallic resin and individually hand-painted Dalek Sec Figurine makes an excellent addition to the Dalek series.

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 98mm tall.