The U.S.S. Enterprise NCC-1701-G — a screen-accurate die-cast model with a 48-page collector book.

At the end of Star Trek: Picard, the ship that had served as the U.S.S. Titan-A was renamed in honour of the most famous name in Starfleet — becoming the U.S.S. Enterprise NCC-1701-G. Command passed to Captain Seven of Nine, with Ensign Jack Crusher at the conn.

Why you'll love it

• The legendary name reborn — Seven of Nine's ship, and a new crew for a new era.
• The 48-page collector book — profiles the Enterprise-G and how it carries the Enterprise legacy forward. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The U.S.S. Titan-A from Star Trek: Picard — a screen-accurate die-cast model with its own 48-page collector book.

The Titan-A carried Jean-Luc Picard and William Riker through the third and final season of Star Trek: Picard, under Captain Liam Shaw and with Commander Seven of Nine at his side, and survived a last confrontation with the Borg. At the end of her mission she was given a new name and registry — becoming the U.S.S. Enterprise NCC-1701-G.

Why you'll love it

• Straight from Picard's final season — the ship at the centre of the story, and the future Enterprise-G.
• The 48-page collector book — profile, annotated plans and the making of Star Trek: Picard, with behind-the-scenes photography and concept art. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Battles in Time presents the next in its line of limited-edition collector's cards focused on the individual Doctors, their companions and their greatest foes. Each set of 15 cards comes in a special collector's pack that is guaranteed to contain every card. The Second Doctor set features companions Jamie and Zoe, the TARDIS and Brigadier Lethbridge-Stewart, alongside nine terrifying monsters including a Yeti, an Ice Warrior, the Cybermen and the Dalek Emperor, plus rogue Time Lord the War Lord. Hidden inside one in every ten collector's sets is the rarest card Battles in Time has ever produced: a metal vortex card, in a super limited edition of just 100 worldwide. Only a hundred collectors will ever own one — and there is no other way to get it. The Second Doctor cards are printed in the original black and white on silver foil, in strictly limited-edition sets of 1,000 pieces worldwide. These cards are not available anywhere else.

"The latest Stargate desktop replica is an incredibly detailed replica of the helmet worn by Anubis’s Jaffa guards. Anubis was one of the most dangerous system lords. Centuries ago, he killed his master Apep and set himself up as the Emperor of the Goa’uld. This led to a civil war, which ended when Ra overthrew Anubis and banished him. At the turn of the 21st century Anubis returned to assume command of the Goa’uld. Anubis was known as the jackal god and this was reflected in the design of the helmets worn by his Jaffa. The helmets were only actually seen in the movie and at the end of Season 8 when they were worn by Jackal guards in Ra’s service. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6” (15 cm) tall when displayed on its bespoke stand."

"In Gerry Anderson’s UFO the interceptors were one-man fighters that were S.H.A.D.O.’s first line of defense against the alien UFOs. They were based on the moon and typically operated in groups of three. Each Interceptor carried a nuclear missile, which the three fighters fired simultaneously to create a wide area of destruction. They were designed to operate in space rather in the Earth’s atmosphere. The die-cast model measures 7” (18 cm) from top to stern, and is based on the acclaimed Sixteen 12 tooling. "

One of the most iconic designs in the history of Stargate. The Goa'uld used Ha'tak motherships to impose their will on the Galaxy.

These vast ships resembled giant, spaceborne pyramids and were equipped with fearsome firepower. After the fall of the Goa'uld they were operated by the Free Jaffa.

This is one of a limited number of Stargate models produced by Eaglemoss.

The model is 8 inches (20 cm) wide.

"On Moonbase Alpha the Eagles were launched from a series of landing pads. The Eagle was designed to land in middle of the red cross, where a corridor would connect to the airlock. The door in the Eagle would then connect to the travel car which ferried the crew to and from the rest of Alpha. This collector’s set consists of a landing pad and a standard Eagle transporter, in perfect scale with one another. The lights around the edge of the pad can be illuminated, the docking tube is motorised and the set produces authentic sounds and dialogue from the series. The Eagle itself is 5.5” long while the landing pad measures an impressive 18” (46 cm) across. "

"The Alkesh was a mid-sized vessel that the Goa’uld used as a troop transport and as a bomber. It was capable of traveling faster than light and could enter a planet’s atmosphere, where it was often used to mount “bombing” raids using plasma charges. When it was used as a troop transport, the Jaffa were deployed using transportation rings. The model is based on the original CG asset used on the show and is 7.25” (18.5 cm) long. "

Collect Doctor Who Battles in Time with this set of five Obliterator packs. The Obliterator Set is being released in two editions. This is the Unlimited Retail Edition, which features a silver foil Obliterator logo. Each pack contains 6 randomly sorted cards* featuring high-spec UV glossed base cards, stunning rainbow foil enhanced rares, and premium holofoil super rares. PLUS with every pack there is a chance of getting one of the un-numbered, ultra rare Vortex cards, which are printed with new metallic technology. There’s only one of these in every 720 packs! There are 142 Obliterator cards to collect in total featuring characters from the Tenth Doctor right up to the latest series, including Daleks, Cybermen, monsters, villains and companions. * Cards are randomly sorted and packs are not guaranteed to contain the cards shown.

Nine chevrons from home, and your desk finally looks the part. This extra-large desk mat puts the Ancient starship Destiny across your workspace - hull schematics, systems readouts and glowing Ancient interface panels, printed edge to edge in that unmistakable deep-space blue. It sits under your keyboard and your mouse, so the whole setup reads as one console. Why you'll want one: * Full Destiny schematic - the ship rendered as a technical blueprint, with plan, profile and detail views, exactly as the Ancients would have logged her * Ancient interface design - dials, gauges, status blocks and Ancient numerals, inspired by the control interfaces of Stargate Universe * Extra large: 31.25"" x 11.5"" - covers keyboard, mouse and the mug you shouldn't have put there * Smooth, fast mousing surface - consistent glide for work or gaming, with no snagging at the edges * Stitched edges - won't fray or peel at the corners, however hard you type * Non-slip rubber back - stays exactly where you put it, all day * Sharp, saturated print - the fine schematic linework and Ancient text stay crisp, not muddy Most Stargate collectibles live on a shelf. This one you actually use - every day, for hours, under your hands. It's the quiet kind of fandom: nobody on the video call spots it, but you know what you're flying. A proper piece of Stargate on your desk for less than the price of a boxset! A genuinely good gift for the Stargate fan who already owns the Puddle Jumper and the ZPM, and an easy first buy for anyone building a Stargate desk setup. Specifications: Dimensions: 31.25"" x 11.5"" (approx. 79cm x 29cm) Surface: Rubber, printed design Edges: Stitched Backing: Non-slip Use: Desk mat, mouse pad, keyboard mat, looking good Care: Wipe clean with a damp cloth. Do not machine wash. This is an art piece intended for display and use. It is not a toy and is not suitable for anyone under the age of 14."

The Ma’tok staff (commonly known as a staff weapon) was the Jaffa’s weapon of choice. It is designed to fire bolts of plasma, with a range of 50-60 meters. The intensity of the blasts, which are powered by a Naquadah generator, can be adjusted so it can stun a human or blast through rock. At close quarters they were often used as a conventional staff weapon. The full-size staff was 6’ 6” (2 m) tall. The desktop replica was digitally sculpted with careful reference to the original props. It  is 12” (30 cm) long and comes with a stand that can be used to display it vertically or horizontal. Prototype images, Final Staff will be diecast for strength and hand finished.

"This is the second in a new line of detailed Stargate desktop replicas, reproducing some of the most iconic props from the classic TV series. This is a beautifully detailed replica of the helmet worn by the Horus Guard. As befits the falcon god, the helmet is designed with the fierce, hooked beak and sculpted headdress of Horus himself. The Horus Guards served Ra and later Heru'ur, and their helmets were among the first sights to greet SG-1 when they stepped through the gate to Abydos - a warning that the gods of Earth's ancient past were very much alive, and still ruling. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6"" (15 cm) tall when displayed on its bespoke stand."

"In Gerry Anderson’s classic 1970 series UFO, S.H.A.D.O. (Supreme Headquarters of the Alien Defense Organisation) used these all-terrain vehicles to track and intercept UFOs. The cab at the front of each mobile had seating for two, while the cabin at the rear could be used for equipment or even a command post. This stunning die-cast model uses the acclaimed Sixteen 12 tooling and features a radar dish. It is 17 cm (just under 6.75”) long and comes with an all-new forest terrain base. "

"Think you know all about Star Trek: The Next Generation? This is the chance to prove it. Which crew member grew up in Alaska? Who did Data called “Grandpa”? How many decks are there on the U.S.S. Enterprise NCC-1701-D? This trivia deck is packed with hundreds of questions divided between Characters, Ships & Tech and Missions. Once you know the category, challenge your friends by choosing your level of difficulty: are you an ensign, a commander or a captain? Only the best are good enough for Starfleet. "

The VIP Eagle brought Commissioner Simmonds to Moonbase Alpha, after John Koenig discovered dangerous levels of magnetic activity. When the Alphans tried to disperse the radioactive waste that was causing the problem, Alan Carter took the VIP Eagle in to lunar orbit and was onboard when he witnessed the explosion that threw the moon out of Earth’s orbit. Unlike the standard Eagles, the VIP Eagle has a distinctive orange pod. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the VIP Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series.

Master Replicas, Insight Editions and Alcon Entertainment are proud to present Deckard’s Police Spiner Car, available for preorder now. The Spinner is a highly-detailed die-cast model of one of the most iconic vehicles to ever appear in a science-fiction movie. It is based on careful study of the model that appeared in Blade Runner 2049, which is a loving replica of the version from the original Blade Runner movie. This new die-cast model has been exhaustively researched and is incredibly detailed. It is 11 inches long and 4.5 inches wide. It is made of die-cast metal and high-quality resin and has a transparent canopy that allows you to look inside at the seats and the detailed dashboard, making for a beautiful display piece.