The D7 battle cruiser is one of the most important ships in the Klingon fleet. This is the original version of the class, which was commissioned by High Chancellor L'Rell to unite the Klingon Houses.

The ship was designed by Ryan Dening, who was careful to pay tribute to Matt Jefferies' original and the redesigned version that was made for Star Trek: The Motion Picture. Dening's version has appeared on both Star Trek: Discovery and Star Trek: Strange New Worlds.

The model is part of Master Replicas new range of 4 to 5-inch long, die-cast models, and is accompanied by a 48-page book, that features in-depth articles based on new interviews with writers Bryan Fuller and Kirsten Beyer, and original production artwork.

In the original 1978 show, the Battlestar Galactica was an advanced vessel that led the Colonial fleet. It had a crew of 500 and carried 75 vipers. The ship was designed by concept artist Ralph McQuarrie who started on the new TV show after working on Star Wars. The brief was to create an aircraft carrier and he gave the ship twin pods on outriggers that provided the vipers with a runway they could land on. The model is just over 10.5 inches (27 cm) long.

The Pegasus has been out of stock for ages, but it's coming back. New stock will be available in February 2026.

The Pegasus was Admiral Caine's Battlestar in one of the rebooted series' most acclaimed story arcs. It was more advanced and powerful than theGalactica, which it massively outgunned.

Most of the design work on the ship was done by CG modeller Jose Perez who set out to make a state of the art ship that was a contrast to the older Galactica. The model is just under 10.5" (26.5 cm) long.

This is a preorder that will ship from February 2026.

In the original series the crew regularly drank coffee from grey cups. In one of the most famous incidents, Kirk discovers that tribbles have got into his dinner, eaten his chicken sandwich and drunk his coffee.

The cups were originally made of styrofoam, whereas ours are made of earthenware. We've also added a detail that you might have missed. When the cups first appeared in 'Where No Man Has Gone Before', they featured an Enterprise logo with a wreath, but it never appeared on them again. With a little help, we sourced that logo from Gene Roddenberry's files at UCLA and have included it on our cup. The tribble is removable, so your coffee should be safe.

**Previously Sold Out Due To High Demand - Now Shipping**

When Battlestar Galactica returned in 2004, it was with a redesigned ship that cleverly echoed the original. Seen from the side, Eric Chu's design looks radically different but when you spin it around, you see the familiar shapes of the classic version.

In the series, the Galactica is a relic of an earlier age, but its primitive technology allowed it to survive the Cylon attack to become humanity's flagship. The model measures just over 10.5 inches (27 cm) long.

Due to Ship March 2026

LIMITED EDITION In the original 1978 version of Battlestar Galactica we were told there were 12 different battlestars but only eight of them were referred to by name. Master Replicas is releasing models of all eight. The Atlantia is being made in a limited edition of 350.  The Atlantia is one of the few Battlestars that appeared on screen. It was President Adar’s flagship and hosted the Council of Twelve during the supposed peace conference over Cimtar. It was destroyed during the Cylon attack after a Cylon Death Squadron flew into one of the flight pods. This classic battlestar from the original series is made from die-cast and ABS, and measures 10.5 inches in length. This is a limited edition model that is shipping now.

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

This is a full-sized, polyresin replica of the dedication plaque for the U.S.S. Enterprise NCC-1701-A. It was the first time a dedication plaque had said that the Enterprise was a Constitution-class ship.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque.

The plaque confirms that the Enterprise was was launched from Earth's San Francisco Fleet Yards.

The U.S.S. Discovery is a Crossfield-class starship that was used as the testbed for the spore drive, and was active during the Klingon war.

This is the original version, which featured in the first two seasons of Star Trek: Discovery, before the ship was sent to the 32nd century.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Voyager. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop in 1994. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that Voyager was an Intrepid-class starship that was launched from Earth Station McKinley on Stardate 48038.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Voyager.

Master Replicas, Insight Editions and Legendary Entertainment are proud to present the Harkonnen Ornithopter, a highly-detailed die-cast model of the iconic vehicle that menaced the skies of Arrakis in the Dune motion picture franchise produced by Legendary.

Shown in flight mode, with the landing gear up and the weapons deployed, the model boasts an impressive wingspan of just under two feet and measures 10.5 inches from nose to stern. It ships fully-assembled and painted, making for an exceptional display piece.

The Ornithopters make frequent appearances in Frank Herbert’s original Dune novels. The film’s art department developed different versions for House of Atreides and House of Harkonnen, with the Harkonnen versions being heavily armed. The result: a spectacular design that swoops over the Arrakean desert raining terror on the Fremen and anything in the Harkonnens’ path.

The modern Viper is a careful update of artist Ralph McQuarrie's original design that was created for the 2004 reboot of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans. No Viper pilot was more compelling than Starbuck, who had all the skills (and flaws) to make her a great pilot; this version of the model has her call sign on the hull. The model is 10.6 inches (27 cm) long.

This incredibly detailed polyresin model recreates Ra's Pyramid from the Stargate movie. This is a real statement piece that measures an impressive 12 inches (30 cm) across and stands over 8 inches (20 cm) tall.

In the movie, Daniel Jackson (played by James Spader) discovers that the ancient Egyptians were enslaved by a race of powerful aliens, known as the Goa'uld System Lords. Their ships were shaped like giant pyramids that open up to launch waves of airborne fighters.

Our model of the Pyramid was sculpted by Ed Giddings with careful reference to the original model that was used to film the visual effects in the movie. Even the individual hieroglyphs have been reproduced in relief.

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

The U.S.S. Shenzhou is a Walker-class starship that was commanded by Captain Georgiou. It was the first ship to encounter the Klingon T'Kuvma and played a major role in the Battle at the Binary Stars, where it was critically damaged.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This version of the Viper appeared in the TV movie Blood & Chrome, which showed us a pivotal battle in the First Cylon war. The design is close to the version that artist Ralph McQuarrie designed for the original 1978 series, but was made more muscular and upgraded for modern audiences.

The Eaglemoss model is just under 10.5 inches (26.5 cm) long.

In the 2004 reimagined Battlestar Galactica, the fleet was regularly menaced by Cylon Raiders, which mounted strafing attacks on the human ships. The Cylon ships had a low level of sentience, which the show's creator Ron D. Moore likened to that of a horse.

The menacing design was created by concept artist Eric Chu, who gave it echoes of the design for the Cylon Centurion.

The Eaglemoss model is 10.6 inches (27 cm) long.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

When Doctor Who returned in 2005, the team built an entirely new TARDIS. This version was bigger than any of its predecessors and, in fact, bigger than an original London police box. The production team actually made four different versions of the prop but there were no significant differences between them.

The model is 1:21 scale to match the Eaglemoss figurines and stands 14.3 cm tall.