"Master Replicas is proud to announce the launch of a brand-new line of officially licensed model ships from Mass Effect.

Leading the launch of this impressive new collectible line is the Normandy SR-2 from Mass Effect 3.

Commander Shepard's legendary vessel has been meticulously crafted in die-cast metal to capture every detail. The model was based on in-game assets to ensure that it is as accurate as possible. It measures 8.66 inches (22 cm) in length, and comes with a stand making it ideal for any collector's shelf or desk.

One of the most iconic designs in the history of Stargate. The Goa'uld used Ha'tak motherships to impose their will on the Galaxy.

These vast ships resembled giant, spaceborne pyramids and were equipped with fearsome firepower. After the fall of the Goa'uld they were operated by the Free Jaffa.

This is one of a limited number of Stargate models produced by Eaglemoss.

The model is 8 inches (20 cm) wide.

This is a replica of the original stargate from Stargate SG-1, also known as the Alpha Gate. The gates were developed over 50 million years ago by the Ancients and can be used to open wormholes between different planets and even different galaxies. The Ancients called them Astria Porta and seeded them throughout the Pegasus and Milky Way galaxies. When the Goa'uld took control of them they called them Chappa'ai, which Daniel Jackson translated as "stargate".

The gate used by SG-1 was buried by the ancient Egyptians after they overthrew the Goa'uld Ra. It was uncovered in 1928 and was eventually powered up at a secret facility in Cheyenne Mountain. It has nine chevrons and 39 glyphs that can be used to dial the address of thousands of inhabited planets.

The model is made of a high quality polystone, which holds the detail exceptionally well. The gate itself has a diameter of 9.25 inches (23.5 cm). It is an individual piece that can be slotted into the display stand, which bears the SG-1 symbol from the planet Earth.

The F-302 fighter interceptor was Earth's first fighter designed to operate in space. It was developed using alien technology that was acquired through the use of the stargates, and was armed with railguns and guided missiles. It had a hyperdrive and could make interstellar journeys.

Length: 4 inches (10 cm); Width: 8 inches (20 cm)

Bilskirnir is Thor’s ship, which made its debut in the Stargate SG-1 season 2 episode ‘Thor’s Chariot’, when it saved SG-1 from the Goa’uld. Bilskirnir was an incredibly powerful Asgard mothership with advanced transporter systems, engines that could cover intergalactic distances in hours, and an ion gun that could obliterate a Goa’uld Hat’tak ship.

In Norse mythology 'Bilskirnir' refers to Thor’s hall, where he lived with his wife Sif and their children.

The Master Replicas die-cast model is 15cm long and is based on the original VFX model, which was supplied to us by the production team.

We've given the X-303 class Prometheus an upgrade. This was one of the last models that Eaglemoss produced and it didn't match their usual standards. For our new version, we've increased the weight and added more detail to the paint scheme.

The Prometheus was the first interstellar battleship developed by Earth. It was based on reverse-engineered Goa'uld technology and was later updated with Asgardian equipment to help it fight the Replicators. It played a vital role in defeating the System Lords. It was eventually destroyed by an Ori satellite.

The model is 7 inches (18 cm) long.

The Puddle Jumpers were Ancient ships that were used to fly through the Stargates to different locations in the Pegasus Galaxy. The Master Replicas model is based on the original VFX files that were used on Stargate Atlantis.

The model itself is just under 6 inches (15 cm) long.

ALL-NEW This brand new 1:21 scale figurine shows the Fourteenth Doctor as he appeared in the three specials. It is exactly the same scale as the Eaglemoss figurine collection and is designed to stand alongside them, bringing the series of Doctors up to date.

When the Fourteenth Doctor regenerated, he was surprised to discover that he had a familiar face. He reunited with his old friend Donna Noble, and fought the Meep and the Toymaker before bi-generating so there were two Doctors at the same time. Then after centuries of adventure, he decided it was time to take a rest.

Scale 1:21, approx 84mm tall.

The U.S.S. Cerritos is a California-class starship that is tasked with making second contact, offering engineering support and making supply runs. It's the star of Star Trek: Lower Decks, and is where Mariner and Boimler served their time as ensigns.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

Master Replicas, Insight Editions and Alcon Entertainment are proud to present Deckard’s Police Spiner Car, available for preorder now. The Spinner is a highly-detailed die-cast model of one of the most iconic vehicles to ever appear in a science-fiction movie. It is based on careful study of the model that appeared in Blade Runner 2049, which is a loving replica of the version from the original Blade Runner movie. This new die-cast model has been exhaustively researched and is incredibly detailed. It is 11 inches long and 4.5 inches wide. It is made of die-cast metal and high-quality resin and has a transparent canopy that allows you to look inside at the seats and the detailed dashboard, making for a beautiful display piece.

The Asurans are the Pegasus Galaxy's version of the Replicators - a race of nanites created by the Ancients, who became sentient and took on the form of their creators. They operated a wide range of Lantean technology including their ships. They most often used the large Aurora-class battleships, but they were supported by these powerful cruisers.

The Asurans generally use Lantean technology. The cruisers were armed with drones and energy weapons and could cloak themselves.

This is a die-cast model and is 8.5 inches (22 cm) long.

This version of the TARDIS was introduced in the 1976 story ‘The Masque of Mandragora’ at the beginning of the fourteenth season. By that point the original TARDIS prop was too battered to survive.

The new TARDIS was designed by Barry Newberry and was wider than its predecessor with a flatter roof. The text on the door panel was white on blue. There were some occasional changes to the lamp but this version remained in use for four years until the story ‘Horns of the Nimon’.

Our model was built by Gavin Rymill. It is 1:21 scale (to go with The Doctor Who Figurine Collection) and stands 132 mm tall to the top of the lamp.

Turn your desk into the bridge of a starship with this extra large desk mat, designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard, and it's almost impossible to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 11.5". It has a rubber surface with stitched edges and a non-slip back.

This model, from Battlestar Galactica: Blood & Chrome shows the Galactica in its prime during the First Cylon War, when it had more gun turrets and heavier armor plating.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

To celebrate the 25th anniversary of The Matrix, Master Replicas are releasing an incredibly detailed die-cast model of Morpheus's ship The Nebuchadnezzar.

When The Matrix was released in 1999, the Wachowskis changed cinema forever. Sci-fi had never been cooler. The original movie played with huge ideas as Morpheus and his allies freed Neo from his mundane reality and introduced him to the truth: a world where the machines have subjugated humanity.

The Nebuchadnezzar, which was designed by concept artist Tani Kunitake, was at the heart of the story. The Neb was a rusting hovercraft that used EM pulses to protect itself from the machines, as Morpheus and his crew managed to stay one step ahead of the robotic Sentinels.

This impressive die-cast model has been digitally sculpted before being cast in zinc alloy and ABS, and painted by hand. It has been officially licensed by Warner Bros. and is a true collectors item.

The ship measures 11.8 inches (30 cm) long.

The U.S.S. Voyager NCC-74656-J was a 32nd-century descendant of Captain Janeway's famous ship. It followed a similar design, but had detached hulls and warp nacelles and used programmable matter. It also acted as the tested for the Pathway drive, which worked without dilithium.

The ship was designed by Ryan Dening. The producers wanted it to be a tribute to Janeway's ship and to show the links between different eras of Star Trek.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which features a brand-new, in-depth interview with ,em>Discovery showrunner Michelle Paradise.

Turn your desk into the bridge of a Constitution-class starship with this extra large desk mat, which is designed to sit under your keyboard and mouse. The artwork is taken directly from displays on the bridge of Captain Kirk's Enterprise as seen in the original series.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

This version of the U.S.S. Enterprise made its debut at the end of Star Trek: Discovery's first season before going on to star in Star Trek: Strange New Worlds where it is commanded by Captain Pike.

The ship is a reimagining of Matt Jefferies' original design combined with elements of the motion picture version of the Enterprise and some subtle nods to the NX-01. It was designed by John Eaves, Scott Schneider and William Budge.

The model is part of Master Replicas new range of 4 to 5-inch long models, and is accompanied by a 48-page book, which slides into the base to make a display.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

The original Viper is a maneuvrable, one-man fighter that was one of the signature models of the original BATTLESTAR GALACTICA. It was designed by legendary concept artist Ralph McQuarrie, who had recently finished work on STAR WARS. The shooting models were beautifully made and rapidly became iconic. The Eaglemoss model was one of the most popular things they ever made. It measures 10.6" (27 cm) long.

**Previously Sold Out Due To High Demand - Now Shipping**

When Battlestar Galactica returned in 2004, it was with a redesigned ship that cleverly echoed the original. Seen from the side, Eric Chu's design looks radically different but when you spin it around, you see the familiar shapes of the classic version.

In the series, the Galactica is a relic of an earlier age, but its primitive technology allowed it to survive the Cylon attack to become humanity's flagship. The model measures just over 10.5 inches (27 cm) long.

Due to Ship March 2026