The Battlestar Valkyrie was smaller and more maneuverable than the Galactica. It served during the First Cylon War, and was part of the ghost fleet that we saw in  Blood & Chrome.

Concept artist Richard Livingston originally designed the Valkyrie for the episode Home, where it appears briefly in a flashback sequence. His design went through several changes when the model was built by Pierre Drolet, who made it look more like a familiar Battlestar. The Eaglemoss model is just over 10.5 inches (27 cm) long.

In the 2004 reimagined Battlestar Galactica, the fleet was regularly menaced by Cylon Raiders, which mounted strafing attacks on the human ships. The Cylon ships had a low level of sentience, which the show's creator Ron D. Moore likened to that of a horse.

The menacing design was created by concept artist Eric Chu, who gave it echoes of the design for the Cylon Centurion.

The Eaglemoss model is 10.6 inches (27 cm) long.

The Viper MK VII was the modern design of fighter that was in service when the Cylons launched their attack on the 12 Colonies. It had the same basic layout as earlier models of Viper but its computer systems were vulnerable to Cylon attack. After they escaped, both the Galactica and Pegasus produced versions without the vulnerable computer systems.

The Eaglemoss model measures just over 10.5 inches (27 cm) long and features Captain Lee Adama's "Apollo" call sign on the hull.

**Previously Sold Out Due To High Demand - Now Available To Pre Order**

When Battlestar Galactica returned in 2004, it was with a redesigned ship that cleverly echoed the original. Seen from the side, Eric Chu's design looks radically different but when you spin it around, you see the familiar shapes of the classic version.

In the series, the Galactica is a relic of an earlier age, but its primitive technology allowed it to survive the Cylon attack to become humanity's flagship. The model measures just over 10.5 inches (27 cm) long.

Due to Ship March 2026

This incredibly detailed polyresin model recreates Ra's Pyramid from the Stargate movie. This is a real statement piece that measures an impressive 12 inches (30 cm) across and stands over 8 inches (20 cm) tall.

In the movie, Daniel Jackson (played by James Spader) discovers that the ancient Egyptians were enslaved by a race of powerful aliens, known as the Goa'uld System Lords. Their ships were shaped like giant pyramids that open up to launch waves of airborne fighters.

Our model of the Pyramid was sculpted by Ed Giddings with careful reference to the original model that was used to film the visual effects in the movie. Even the individual hieroglyphs have been reproduced in relief.

Master Replicas is proud to announce the launch of a brand-new line of officially licensed Foundation model ships based on the hit Skydance Television series.

Leading the launch of this incredible new collectible line is the Imperial Jump Ship, a faster-than-light vessel used by the Empire to dominate space travel. This intricately detailed, 10.75-inch die-cast model is crafted using the original CG mesh used by the Foundation VFX team during the making of the series, ensuring an incredible degree of accuracy.

This is Master Replicas first ever Doctor Who ship: the Dalek saucer from 2005's 'The Parting of the Ways'. This impressive polyresin model is 21 cm across and was sculpted by Dalek expert Gavin Rymill. The Daleks used saucers with a similar design in the TV Century 21 Dalek comic strip, but in the 1960s TV budgets didn't stretch to expensive spaceship models. The classic Dalek ship only made its debut in 2005 when a massive fleet of Dalek ships prepared to invade Earth. The ship was made as a 3D CG model by the Mill. Master Replicas recruited Dalek expert Gavin Rymill to recreate the ships using renders made at the time and careful study of the episodes. 

The Galactica was at the heart of the original 1978 version of Battlestar Galactica, and under Adama's command it led the colonial fleet as they looked for a new home. This classic ship was designed by the legendary artist Ralph McQuarrie.

The model is just over 10.5 inches (27 cm) long, and this special collector's release has been plated in gold and comes in a collectors box.

This edition is limited to 500 pieces and is exclusively available from Master Replicas.

The Cylon Basestars housed the fighters that pursued the Galactica in the original 1978 version of Battlestar Galactica. The ship is a classic that was designed by the legendary artist Ralph McQuarrie.

The model measures just over 6 inches across (15.5 cm) and this special collector's release has been plated in gold and comes in a collectors box.

This edition is limited to 500 pieces and is exclusively available from Master Replicas. 

The Loki was a heavy cruiser that saw service in the First Cylon War. It was designed to carry supplies to combat vessels, but was heavily armed itself with 35 guns. The Loki was created for Battlestar Galactica: Blood & Chrome where it was part of the ghost fleet that was hidden from the Cylons.

The Eaglemoss model is approximately 10.5 inches (27 cm) in length.

HOT DOG VARIANT LIMITED TO 750

The modern Viper is a careful update of Ralph McQuarrie's original design that was created for the 2004 reimagining of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans.

The Eaglemoss model bears the call sign "HOT DOG" for pilot Lt. Brendan Constanza, and is 10.6 inches (27 cm) long.

The Sphere, or Cruiser, was the Kaylon's main attack ship. Each Cruiser was equipped with one Interceptor, which served as an auxiliary craft. All spheres were equipped with highly advanced technology, a single central cannon with impressive firepower and a hull that resisted target-locking.

Cruisers are capable of sustained quantum travel at 35 lightyears per hour.

The model is just under 7 inches (17.5 cm) across.

For its third season The Orville got a new shuttle that looked sleeker and more aggressive than its predecessor.

The model is 7 inches (18 cm) long

Destroyers were a pivotal part of the Krill military. A destroyer engaged enemy ships in direct combat, and its bombing capabilities made the ship the ideal choice to attack colony planets from space.

Yet destroyers were more than simple attack ships: the Krill designed them to host entire families, providing living arrangements, religious sanctuaries, and classrooms for children.

The model is approximately 8.66 inches (22 cm) long.

The ships in The Expanse rely on an Epstein drive to reach the kinds of speed that make interplanetary travel practical. The drive was first tested on a second-hand yacht, and was discovered almost by accident.

This is one of the last models that Eaglemoss produced and we have them all.

Yacht length: 6 inches (16 cm); width: 4.7 inches (12 cm); height: 4.3 inches (11 cm).

One of the last models Eaglemoss released was the light cycle from the classic 1982 movie 'Tron'. This is the blue version. The red, yellow and orange versions were also released in a limited edition. The film used groundbreaking effects techniques and the cycles themselves were designed by the legendary Syd Mead, who is famous for his work on 'Blade Runner' and 'Aliens'. The Eaglemoss model is 8.7 inches (22 cm) long.

This version of the Raider was seen in the TV movies Blood & Chrome and Razor. It was the design that was used in the First Cylon War and was an updated version of Ralph McQuarrie's mechanical original, which the production team redesigned to look more advanced.

The model has a wingspan of 7.5 inches (19 cm).

RARE SITE EXCLUSIVE The Kaylon Interceptor from The Orville is the smaller ship with a 'tail' that was carried inside the Kaylon sphere.

The model is just under 7 inches (17.5 cm) long. 

The F-302 fighter interceptor was Earth's first fighter designed to operate in space. It was developed using alien technology that was acquired through the use of the stargates, and was armed with railguns and guided missiles. It had a hyperdrive and could make interstellar journeys.

Length: 4 inches (10 cm); Width: 8 inches (20 cm)

Scar was one of the deadliest Cylon Raiders. It had gained experience as a result of being killed and resurrected many times, and grew more cunning with each resurrection. Starbuck set out to kill it, but was only able to achieve her mission with help from Kat.

Scar measures approximately 10 inches (25.4 cm) in length.