This beautiful polystone model of the standard Dalek introduced in 2005 stands 197 mm tall.

This is the first in a new line of medium-sized Daleks and is an upgrade on the smaller Daleks Eaglemoss released with a more detailed gun and glass 'ears'. At 1:8.5 scale it is the perfect size to fit on your shelves.

This is the Dalek that started it all: the original version which made its debut in the 1963 episode 'The Dead Planet'. These first Daleks were restricted to their city on Skaro and drew power through the floor, but they were every bit as deadly and evil as the Daleks that followed.

This new model was sculpted by Dalek expert Gavin Rymill and is approximately 7 inches (18 cm) tall. It is made of polystone, has a detailed gun and manipulator arm, both of which are attached by magnets, and in an upgrade on previous models it has transparent 'ears'.

Ships Mid November

This is Master Replicas first ever Doctor Who ship: the Dalek saucer from 2005's 'The Parting of the Ways'. This impressive polyresin model is 21 cm across and was sculpted by Dalek expert Gavin Rymill. The Daleks used saucers with a similar design in the TV Century 21 Dalek comic strip, but in the 1960s TV budgets didn't stretch to expensive spaceship models. The classic Dalek ship only made its debut in 2005 when a massive fleet of Dalek ships prepared to invade Earth. The ship was made as a 3D CG model by the Mill. Master Replicas recruited Dalek expert Gavin Rymill to recreate the ships using renders made at the time and careful study of the episodes. 

This stunning figure of the Dalek Battle Computer features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

This figure depicts the Dalek as it appeared in the classic Seventh Doctor adventure from 1988 ' Remembrance of the Daleks'.

Fully BBC licensed and approved merchandise.

Part of the Rare Dalek subscriber series.

Scale 1:21, approx 78mm tall.

Fully BBC licensed and approved merchandise.

Scale 1:21.

This set contains some of the most terrifying Daleks in history, from the Dalek drones that invaded Earth to the Supreme Dalek that tried to destroy all of reality. Several of these Daleks have unusual weapons such as flamethrowers or machine guns. There are different factions, including an Imperial Dalek, the leader of the renegade group that fought Davros, and even one of the  New Paradigm Daleks that emerged from the Genesis Ark. Supreme Dalek – “The Stolen Earth” New Paradigm Dalek Drone – “Asylum of the Daleks” Flamethrower Dalek – “The Daleks’ Masterplan” Imperial Faction Dalek – “Remembrance of the Daleks” Machine Gun Dalek – "Death to the Daleks" Dalek Drone – “The Dalek Invasion of Earth” Renegade Supreme Dalek – “Remembrance of the Daleks” Supreme Dalek – “The Daleks’ Masterplan” Suicide Squad Dalek – “Destiny of the Daleks” Dalek Guard – “The Evil of the Daleks”

This stunning figure of the Death Zone Dalek features incredible detail and is part of a collectable limited edition series of fine quality figurines. This was part of Eaglemoss's series of rare Daleks.

This model of Supreme Dalek appeared in the Fifth Doctor story 'Resurrection of the Daleks', which sees the Daleks attack London and make moves in their war with the Time Lords. It is 7.6 cm tall.

This super figure of the rare Saucer Commander Dalek features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Each figure is created from a refined 3D digital sculpture which is then cast in special metallic resin and hand painted.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

This SD3 figure in the series features the moment in time from the episode "The Dalek Invasion Of Earth".

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 80mm tall.

Only originally available to subscribers of the Doctor Who Figurine Collection Magazine.

New and rare. Don't miss this from your collection.

This figure of the New Paradigm Dalek features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

Scale 1:21, approx 80mm tall.

This figure of the New Paradigm Dalek features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

This figure depicts the Dalek as it appeared in the 'Asylum of the Daleks' episode.

Fully BBC licensed and approved merchandise.

Part of the Rare Dalek subscriber series.

Scale 1:21, approx 80mm tall.

After the end of the Time War the Doctor believed that all the Daleks were trapped outside normal space and time, but one of them had survived. The Tenth Doctor and Rose found the 'Last Dalek' in Henry van Staten's museum of alien artefacts. The Dalek was revived after it absorbed time-travelling energy from Rose. it started a killng spree before it realized it had developed a conscience and destroyed itself. This version of the modern Dalek has a slightly different paint scheme to all the other Daleks. It is roughly 7.5 cm tall.

This stunning figure of the classic Supreme Dalek features incredible detail and is part of a collectable limited edition series of fine quality figurines.

This figure depicts this terrifying Dalek as seen in the season 10 episode 'Planet of the Daleks'.

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 80mm tall.

This is the version of the Dalek which appeared in the first season after Doctor Who returned in 2005. It is subtly different from the Dalek that appeared earlier in the season, with some changes to the painting and it went on to become the definitive take on the Daleks. The figurine is 8 cm tall.

This extraordinary brass model of a Dalek is being made in a strictly limited edition of 150 pieces, each of which is individually numbered with laser engraving on the base. The Dalek is the version that survived the Time War and that first appeared April 2005, when it confronted the Ninth Doctor. It was sculpted by renowned Dalek expert Gavin Rymill and cast in brass. The manipulator arm, gun and eyestalk are attached magnetically. The base is fully sculpted. The model stands 195 mm tall and weighs an impressive 1.785 kg. Each Dalek is a true collector’s item.

This figure of the Lin-Dalek features incredible detail and is part of a collectable limited edition series of fine quality figurines. Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

The Lin-Dalek figurine captures the likeness of actress Charlotte Ritchie with squid-like Dalek on her back. His tentacles are wrapped around her body giving full control of her body and mind to the Dalek. She is standing in an unnaturally stiff pose giving her a puppet look.

This highly detailed figurine captures the Lin-Dalek as they appeared in the Thirteenth Doctor episode, 'Resolution'.

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 91mm tall.

This model of Supreme Dalek appeared in the Fifth Doctor story  'Resurrection of the Daleks', which sees the Daleks attack London and make moves in their war with the Time Lords. It is 7.6 cm tall.

This stunning figure of Dalek Sec features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

This figure captures Dalek as they appear in he Tenth Doctor episode 'The Daleks Take Manhattan'. The half human-Dalek hybrid was a failed Dalek experiment in revitalising their race. Brought to eerie life by expert modellers, cast in metallic resin and individually hand-painted Dalek Sec Figurine makes an excellent addition to the Dalek series.

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 98mm tall.