The U.S.S. Rubidoux from Lower Decks — a limited-edition die-cast with a 48-page collector book.

The California-class U.S.S. Rubidoux was commanded by Captain Dayton. In 2380 it met an entity that fed on its power until it absorbed the whole ship; Dayton and her crew were beamed to safety by the U.S.S. Cerritos moments before the entity merged with the Rubidoux.

Why you'll love it

• Limited edition — only 500 pieces, in command-division red.
• The 48-page collector book — the shared California-class book on the Cerritos and the making of Lower Decks (Mike McMahan interview). More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The original 2250s D7 battle cruiser — die-cast, with a 48-page collector book.

The D7 is one of the most important ships in the Klingon fleet. This is the original version of the class, commissioned by High Chancellor L'Rell to unite the Klingon Houses, and seen on both Discovery and Strange New Worlds.

Why you'll love it

• A design with heritage — by Ryan Dening, honouring Matt Jefferies' original and the Motion Picture redesign.
• The 48-page collector book — in-depth articles from new interviews with Bryan Fuller and Kirsten Beyer, plus original production artwork. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The modern Viper is a careful update of artist Ralph McQuarrie's original design that was created for the 2004 reboot of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans. No Viper pilot was more compelling than Starbuck, who had all the skills (and flaws) to make her a great pilot; this version of the model has her call sign on the hull. The model is 10.6 inches (27 cm) long.

The mysterious UFOs were at the heart of Gerry Anderson’s live-action television series UFO. These alien craft were never fully explained. We knew very little about their abilities, we only knew that they could travel faster than light, and that they could survive for a limited amount in our atmosphere.

This impressive model, which measures 10 cm (just under 4”) across, is based on the acclaimed Sixteen 12 tooling. It comes with a specially-commissioned base showing the lunar surface.

The U.S.S. Enterprise NCC-1701-G — a screen-accurate die-cast model with a 48-page collector book.

At the end of Star Trek: Picard, the ship that had served as the U.S.S. Titan-A was renamed in honour of the most famous name in Starfleet — becoming the U.S.S. Enterprise NCC-1701-G. Command passed to Captain Seven of Nine, with Ensign Jack Crusher at the conn.

Why you'll love it

• The legendary name reborn — Seven of Nine's ship, and a new crew for a new era.
• The 48-page collector book — profiles the Enterprise-G and how it carries the Enterprise legacy forward. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

"In Gerry Anderson’s classic 1970 series UFO, S.H.A.D.O. (Supreme Headquarters of the Alien Defense Organisation) used these all-terrain vehicles to track and intercept UFOs. The cab at the front of each mobile had seating for two, while the cabin at the rear could be used for equipment or even a command post. This stunning die-cast model uses the acclaimed Sixteen 12 tooling and features a radar dish. It is 17 cm (just under 6.75”) long and comes with an all-new forest terrain base. "

Captain Janeway's U.S.S. Voyager — die-cast, with a 48-page collector book.

One of the most famous ships in Starfleet history. In 2371 the U.S.S. Voyager was flung 70,000 light years across the galaxy by the Caretaker. A journey that should have taken 70 years, Janeway's crew made in seven.

Why you'll love it

• The long way home — new species, and the Borg, every step of the way.
• The 48-page collector book — the making of Star Trek: Voyager, from extensive interviews with the show's creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

LIMITED EDITION In the original 1978 version of Battlestar Galactica we were told there were 12 different battlestars but only eight of them were referred to by name. Master Replicas is releasing models of all eight. The Atlantia is being made in a limited edition of 350.  The Atlantia is one of the few Battlestars that appeared on screen. It was President Adar’s flagship and hosted the Council of Twelve during the supposed peace conference over Cimtar. It was destroyed during the Cylon attack after a Cylon Death Squadron flew into one of the flight pods. This classic battlestar from the original series is made from die-cast and ABS, and measures 10.5 inches in length. This is a limited edition model that is shipping now.

The Crossfield-class U.S.S. Discovery and its spore drive — die-cast, with a 48-page collector book.

The U.S.S. Discovery was the testbed for the experimental spore drive and served through the Klingon war. This is the original version from the first two seasons of Star Trek: Discovery, before the ship was sent to the 32nd century.

Why you'll love it

• An unmistakable design — by John Eaves with creators Bryan Fuller and Alex Kurtzman, inspired by legendary designer Ken Adam's work on an unmade 1970s Star Trek film.
• The 48-page collector book — the ship's profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The California-class U.S.S. Merced from Lower Decks — a limited-edition die-cast with a 48-page collector book.

The California-class U.S.S. Merced was transformed in a 2381 terraforming accident. Working with the U.S.S. Cerritos to recover an ancient generation ship, both ships were “infected” with terraforming fluid; the Cerritos reversed the effects, but the Merced was badly damaged.

Why you'll love it

• Limited edition — only 500 pieces, in science-division blue.
• The 48-page collector book — the shared California-class Cerritos / Lower Decks book. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Master Replicas, Insight Editions and Legendary Entertainment are proud to present the Harkonnen Ornithopter, a highly-detailed die-cast model of the iconic vehicle that menaced the skies of Arrakis in the Dune motion picture franchise produced by Legendary.

Shown in flight mode, with the landing gear up and the weapons deployed, the model boasts an impressive wingspan of just under two feet and measures 10.5 inches from nose to stern. It ships fully-assembled and painted, making for an exceptional display piece.

The Ornithopters make frequent appearances in Frank Herbert’s original Dune novels. The film’s art department developed different versions for House of Atreides and House of Harkonnen, with the Harkonnen versions being heavily armed. The result: a spectacular design that swoops over the Arrakean desert raining terror on the Fremen and anything in the Harkonnens’ path.

The Tachi was the original name and paint scheme for the Rocinante when it was an MCRN ship. It appeared in the first season of The Expanse before Holden and his crew repainted and renamed it.

The model is 10 inches (25 cm) long.

This is a limited edition of 500 pieces that is exclusively available to club members.

Shipping From: February 2025

This version of the Viper appeared in the TV movie Blood & Chrome, which showed us a pivotal battle in the First Cylon war. The design is close to the version that artist Ralph McQuarrie designed for the original 1978 series, but was made more muscular and upgraded for modern audiences.

The Eaglemoss model is just under 10.5 inches (26.5 cm) long.

JJ Abrams' sleeker, bolder 2009 Enterprise — die-cast, with a 48-page collector book.

When Star Trek was rebooted for the big screen in 2009, the creators redesigned the Enterprise to look sleeker and sexier than ever — the “hotrod” version, as director JJ Abrams put it. It also appeared in Star Trek Into Darkness before being modified for Star Trek Beyond.

Why you'll love it

• Three films of history — the reboot Enterprise across the Kelvin-timeline trilogy.
• Designed by Ryan Church, famed for his work on the Star Wars films.
• The 48-page collector book — its profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Galaxy-class U.S.S. Enterprise-D — die-cast, with a 48-page collector book.

The Galaxy-class U.S.S. Enterprise-D was Starfleet's flagship in the 2360s and early 2370s. Under Captain Picard it made first contact with Q, broke the Borg's first invasion of the Federation, and was destroyed in 2371 after an encounter with the renegades Lursa and B'Etor.

Why you'll love it

• The heart of The Next Generation — one of the most beloved ships in all of Star Trek.
• The 48-page collector book — the making of TNG, from extensive interviews with the show's creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Invictus was one of the most powerful warships the Empire ever built. It was an extraordinary eight kilometers across, with a crew of 300,000. It had a jump drive and was heavily armed. It was lost in action when its jump drive malfunctioned and it then spent more than a thousand years jumping from place to place.

It was eventually discovered by the Anacreons, who forced a team from Foundation, including Salvor Hardin and Hugo Crast, to salvage it. The Foundation took control of the Invictus and reverse engineered much of its technology to create their whisper ships. The Invictus was eventually destroyed in a battle with the Empire in orbit around Terminus when Cleon XVII attacked the Foundation.

The model of the Invictus measures 8” (200 mm) across and the two inner rings spin freely so you can choose how to position them. It comes in premium packaging with a magnetic flap.

LIMITED EDITION In the original 1978 Battlestar Galactica, we were told there were twelve battlestars, though only eight were ever named on screen. Three more battlestar names — Solaria, Cerberus and Prometheus — were waiting in the wings, intended to join the Colonial fleet had the series continued. The Battlestar Prometheus is being made in a limited edition of just 500. One of those long-rumoured additions to the fleet, she takes her place at last alongside the Galactica and her sister ships — a piece of Battlestar Galactica lore realised for the very first time. This classic-era battlestar is made from die-cast and ABS, and measures 10.5 inches in length. This is a limited edition that will ship to customers in October.

Captain Georgiou's Walker-class U.S.S. Shenzhou — die-cast, with a 48-page collector book.

The Walker-class U.S.S. Shenzhou was commanded by Captain Georgiou and was the first ship to encounter the Klingon T'Kuvma, playing a major role in the Battle at the Binary Stars, where it was critically damaged.

Why you'll love it

• First contact, first shots — the ship that opened Star Trek: Discovery.
• The 48-page collector book — its profile, annotated plans and the design by John Eaves. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

In the reimagined Battlestar Galactica the design of the Cylon Basestar was completely reworked. The new Basestar was an organic spaceship that was as much a being as a vehicle. It was controlled by a hybrid that could perceive things outside normal reality.

The new version was designed by artists Gary Hutzel and Eric Chu, who saw it as more advanced than the human ships.

The Eaglemoss model measures 10.25 inches (26 cm) across.

In the 2004 reimagined Battlestar Galactica, the fleet was regularly menaced by Cylon Raiders, which mounted strafing attacks on the human ships. The Cylon ships had a low level of sentience, which the show's creator Ron D. Moore likened to that of a horse.

The menacing design was created by concept artist Eric Chu, who gave it echoes of the design for the Cylon Centurion.

The Eaglemoss model is 10.6 inches (27 cm) long.