The Silurians ruled Earth millions of years before humans evolved, but environmental changes forced them to put themselves into hibernation. This version of the Silurians is from the Fifth Doctor story 'Warriors of the Deep' when they teamed up with their cousins the Sea Devils to attack Sea Base Four as the beginning of a plot to reclaim control of the Earth. The figurine is approximately 11 cm tall.

This is the Dalek that started it all: the original version which made its debut in the 1963 episode 'The Dead Planet'. These first Daleks were restricted to their city on Skaro and drew power through the floor, but they were every bit as deadly and evil as the Daleks that followed.

This new model was sculpted by Dalek expert Gavin Rymill and is approximately 7 inches (18 cm) tall. It is made of polystone, has a detailed gun and manipulator arm, both of which are attached by magnets, and in an upgrade on previous models it has transparent 'ears'.

Ships Mid November

When the Doctor was suffering from a bout of depression he took refuge in nineteenth century London. While he was there he encountered the Great Intelligence, who was bringing malevolent snowmen to life to act as his enforcers. The Snowman figurine is 10 cm tall.

There's nothing better to cuddle up to than this plush version of Star Trek: Lower Decks Badgey. Sure, he's a psychopath who wants to kill us all, but rendered in plush, he couldn't be cuter or cuddlier.

Badgey was originally a training hologram, who was created by Rutherford. Unfortunately, he was made using unstable AI and, after some holodeck malfunctions, he gained sentience and set out to kill his creator. Despite having his neck broken and his memory wiped, he kept coming back before eventually evolving into a digital god and heading off to create his own universe.

Badgey is the second in Master Replicas Lower Decks plush series and joins Moopsy, which is back in stock after a sell-out first run.

Order now to get the first edition, which comes with a limited-edition Badgey card.

Size: 10 inches x 5.5 inches (25 cm x 14 cm).

The Moopsy is one of the cuddliest creatures in the Galaxy but watch out — this little ball of cuteness is an alien murderer that will drink your bones.

Moopsy is a fan-favourite alien from Star Trek: Lower Decks. It looks friendly but it can move at lightning-fast speeds and, once it sinks its fangs into its prey, it can drink its bones in seconds.

When it escaped from Narj's Miraculous Menagerarium it killed Narj and two Pyrithian swamp gobblers before Ransom and Mariner lured it back into it's cage. Handle with care!

Size: 10 inches x 5.5 inches (25 cm x 14 cm)

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

In the original series the crew regularly drank coffee from grey cups. In one of the most famous incidents, Kirk discovers that tribbles have got into his dinner, eaten his chicken sandwich and drunk his coffee.

The cups were originally made of styrofoam, whereas ours are made of earthenware. We've also added a detail that you might have missed. When the cups first appeared in 'Where No Man Has Gone Before', they featured an Enterprise logo with a wreath, but it never appeared on them again. With a little help, we sourced that logo from Gene Roddenberry's files at UCLA and have included it on our cup. The tribble is removable, so your coffee should be safe.

The bridge of every Starship has a dedication plaque that records where it was built and when it entered service, and lists its class, registry and motto.

Eaglemoss produced a series of plaque replicas, designed to be hung on a wall or displayed on a shelf.

This plaque replicates that of the Crossfield-class U.S.S. Discovery and features the motto "All things can be understood once they are discovered; the point is to discover them."

The plaque measures approximately 9 inches (22 cm) across.

The U.S.S. Shenzhou was commanded by Captain Philippa Georgiou. The dedication plaque on the bridge revealed that it was a Walker-class ship that was constructed at the San Francisco Shipyards. The plaque also reveals that its motto was "All existing things are really one."

The Eaglemoss replica plaque is 8.66 inches (22 cm) long by 6.3 inches (16 cm) tall, and is designed for wall or shelf display.

Turn your desk into the bridge of a Constitution-class starship with this extra large desk mat, which is designed to sit under your keyboard and mouse. The artwork is taken directly from displays on the bridge of Captain Kirk's Enterprise as seen in the original series.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

Turn your desk into the bridge of a starship with this extra large desk mat, designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard, and it's almost impossible to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 11.5". It has a rubber surface with stitched edges and a non-slip back.

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

The Asurans are the Pegasus Galaxy's version of the Replicators - a race of nanites created by the Ancients, who became sentient and took on the form of their creators. They operated a wide range of Lantean technology including their ships. They most often used the large Aurora-class battleships, but they were supported by these powerful cruisers.

The Asurans generally use Lantean technology. The cruisers were armed with drones and energy weapons and could cloak themselves.

This is a die-cast model and is 8.5 inches (22 cm) long.

The Stargate Death Glider was one of the very last models that Eaglemoss produced. It was a small fighter created by the Goa'uld that could operate in space or in a planet's atmosphere, and was often used to intimidate and control the Goa'uld's human subjects. The model has a wingspan of just under 8" (20 cm).

The F-302 fighter interceptor was Earth's first fighter designed to operate in space. It was developed using alien technology that was acquired through the use of the stargates, and was armed with railguns and guided missiles. It had a hyperdrive and could make interstellar journeys.

Length: 4 inches (10 cm); Width: 8 inches (20 cm)

The Puddle Jumpers were Ancient ships that were used to fly through the Stargates to different locations in the Pegasus Galaxy. The Master Replicas model is based on the original VFX files that were used on Stargate Atlantis.

The model itself is just under 6 inches (15 cm) long.

This incredibly detailed polyresin model recreates Ra's Pyramid from the Stargate movie. This is a real statement piece that measures an impressive 12 inches (30 cm) across and stands over 8 inches (20 cm) tall.

In the movie, Daniel Jackson (played by James Spader) discovers that the ancient Egyptians were enslaved by a race of powerful aliens, known as the Goa'uld System Lords. Their ships were shaped like giant pyramids that open up to launch waves of airborne fighters.

Our model of the Pyramid was sculpted by Ed Giddings with careful reference to the original model that was used to film the visual effects in the movie. Even the individual hieroglyphs have been reproduced in relief.

Bilskirnir is Thor’s ship, which made its debut in the Stargate SG-1 season 2 episode ‘Thor’s Chariot’, when it saved SG-1 from the Goa’uld. Bilskirnir was an incredibly powerful Asgard mothership with advanced transporter systems, engines that could cover intergalactic distances in hours, and an ion gun that could obliterate a Goa’uld Hat’tak ship.

In Norse mythology 'Bilskirnir' refers to Thor’s hall, where he lived with his wife Sif and their children.

The Master Replicas die-cast model is 15cm long and is based on the original VFX model, which was supplied to us by the production team.

We've given the X-303 class Prometheus an upgrade. This was one of the last models that Eaglemoss produced and it didn't match their usual standards. For our new version, we've increased the weight and added more detail to the paint scheme.

The Prometheus was the first interstellar battleship developed by Earth. It was based on reverse-engineered Goa'uld technology and was later updated with Asgardian equipment to help it fight the Replicators. It played a vital role in defeating the System Lords. It was eventually destroyed by an Ori satellite.

The model is 7 inches (18 cm) long.